CHAIN ATTACHMENTS

CHAIN ATTACHMENTS

[Back]

Double Clevis/ Mid-Link

For permanent or temporary use, attaching chain hooks, rings, swivels, fittings, log chains, etc

Forged in the US from high quality carbon steel, then quenched and tempered

Heat treated pins

Sizes for 1/4" through 5/8" chain - grades 30, 43, and 70 - four numbers fit six sizes of chain

Finishes include self-colored or bright zinc (ASME B633-85 Class Fe/Zn 5, Type III)

Links embossed with chain fractional size, country of origin (USA), and manufacturer's ID

Hooks embossed with trace code providing traceability throughout manufacturing and testing process to heat of steel

Reusable - easy to install or remove

Design ultimate strength equals 4 times working load limit, matching NACM specifications

Approved CVSA repair link

Not to be used for overhead lifting

Click Here to view Metric Chart

SIZE

Chain Size	Working Load Limit	Dimensions in inches (see figure)
(in)	(lbs)	W	D	T	L	C	H	Pin
1/4 or 5/16	4,700	0.43	1.09	0.34	0.50	1.70	2.61	3/8
3/8	6,600	0.50	1.28	0.40	0.50	2.00	3.06	7/16
7/16 or 1/2	11,300	0.65	1.62	0.54	0.69	2.59	3.90	9/16
5/8	15,800	0.75	1.84	0.63	0.75	2.81	4.31	11/16

	WARNING
Improper use or care of attachments can result in bodily injury or property damage. To avoid injury or damage, always observe the following when using chain attachments: Use only alloy attachments for overhead lifting. Do not exceed working load limit. Do not shock or impact load. Do not side load - center line of load must coincide with center line of attachment. Do not replace pin with other than original equipment parts. Inspect before use for wear, deformation, and pin engagement.

Chain Size