 |
|
Tractor Drawbar Hook
The tractor drawbar hook is made from micro alloy steel and supplied
with a micro alloy pin. The pin is painted orange. Samples are
tested to the Minimum Breaking Strength requirement. The design
factor on the tractor drawbar hook is 3:1. |
Part
Number |
UPC
043927- |
Body
Size (in) |
Standard
Pack |
Working
Load
Limit (lbs) |
Approximate
Weight Ea
(lbs) |
| M834 |
43028-4 |
1/2 |
5 |
9,200 |
3.0 |
| M2X834 |
43013-0 |
Replacement
Pin
and Hair Pin |
|
|
|
|
 |
WARNING |
|
TO AVOID INJURY OR DAMAGE: DO NOT EXCEED
WORKING LOAD LIMIT OF DRAWBAR HOOK |
ALWAYS INSPECT
BEFORE USE FOR WEAR, DAMAGE OR DISTORTION
REMOVE FROM SERVICE IF PIN IS EXCESSIVELY WORN OR DAMAGED
INSURE A TIGHT FIT (SIZE PIN TO APPLICATION) |
|
