Phone:  (800) 756-6656 
Fax:      (800) 374-2329 

LOAD SECUREMENT

E-Z Pro cam release lever load binder

EZ Pro Forged Lever Binder


  • Provides recoilless CAM release design
  • Low energy release binder by Dixie allows you to release the binder effortlessly, without using any tools or prying.
  • Binder can be released under load with one finger.
  • High visibility yellow paint
  • Patented design providing low energy cam release that releases tension at a constant point - always at 12 o'clock position
  • Free turning, 360 degree continuous swivel action in both tongue and clevis for enhanced straight line pull
  • Binder toggles away from load
  • As with all Dixie binders, 100% proof tested as part of manufacturing process
Click Here to view Metric Chart
SIZE

 

Part Number

Chain Grade & Size (in)

Take up

(in)

Handle Length

(in)

Working Load Limit (WLL)
(lbs)

Weight Each

(lbs)

G30

G43

G70

48405

3/8

3/8

5/16

4.75

16.62

5,400

9.0

48406

1/2

1/2

3/8

4.75

16.62

9,200

9.8

 

 
WARNING
Death / injury can occur from improper use or maintenance of tie-down equipment. To avoid injury:
  • Inspect before use - remove from service if cracked, worn, or deformed.
  • Do not overload - load binders develop approximate working load with hand effort.
  • Do not use handle extender on load binder(s).
  • Do not use binder components for overhead lifting.
  • Load binding systems store energy which can release suddenly.
  • Operate only by hand from a firm standing position.
  • Operate handle cautiously.
  • Stay clear of handle path; handle may release suddenly.
  • Follow Operating Instructions. Operating Instructions:
    • Follow DOT Federal Motor Carrier Safety regulations '392.9, '393.100, and '393.102. See Downloads section for copies of these regulations.
    • Inspect before use. Replace worn and deformed binders. Lubricate pivot and swivel points for optimum performance.
    • Do not operate with anyone on load.
    • Always apply binder in a straight line hook to hook manner without bending and such that handle goes down when securing load.
    • Tighten binders before moving and recheck frequently.
    • Do not exceed Working Load Limit shown on binder.
    • Do not use cheater bar or handle extension as such use can overload binder system and result in injury.
    • Secure handle down with a positive retaining method.
    • Release handle / load with extreme care. Make sure all personnel are clear. Lever binder handles can snap back over center. Use open palm under handle and push up.

 
Click On The Respective Links To View More Details
Click On The Respective Links To View More Details