|
LOAD SECUREMENT
|
|
Heavy Hauler Accessories
|
|
Click Here to view Metric Chart |
SIZE
G80 CHAIN ASSEMBLIES / CLEVLOKTM GRAB HOOKS EACH
END
Part Number
|
Grade
|
Size
|
Working Load Limit (lbs)
|
Weight Ea (lbs)
|
607037CL20
|
G80
|
3/8 in x 20 ft
|
7,100
|
31.5
|
607037CL25
|
G80
|
3/8 in x 25 ft
|
7,100
|
38.0
|
607050CL15
|
G80
|
1/2 in x 15 ft
|
12,000
|
42.0
|
607050CL20
|
G80
|
1/2 in x 20 ft
|
12,000
|
55.0
|
G80 CHAIN ASSEMBLIES / CLEVLOKTM GRAB HOOKS EACH
END
Part Number
|
Grade
|
Size
|
Working Load Limit (lbs)
|
Weight Ea (lbs)
|
607337CL20
|
G100
|
3/8 in x 20 ft
|
8,800
|
32.0
|
607337CL25
|
G100
|
3/8 in x25 ft
|
8,800
|
38.5
|
G80 CHAIN CLEVLOKTM GRAB HOOKS WITH CRADLE
Part Number
|
Grade
|
Size
|
Working Load Limit (lbs)
|
Weight Ea (lbs)
|
659225
|
G80
|
3/8 in
|
7,100
|
1.4
|
659228
|
G80
|
1/2 in
|
12,000
|
2.7
|
G80 OMEGALOK
Part Number
|
Grade
|
Size
|
Working Load Limit (lbs)
|
Weight Ea (lbs)
|
644138
|
G80
|
3/8 in
|
7,100
|
1.0
|
644150
|
G80
|
1/2 in
|
12,000
|
1.8
|
G80 HAMMERLOKTM
Part Number
|
Grade
|
Size
|
Working Load Limit (lbs)
|
Weight Ea (lbs)
|
664038
|
G80
|
3/8 in
|
7,100
|
1.0
|
664250
|
G80
|
1/2 in
|
12,000
|
1.0
|
COMPRESSION UNITS
Type
|
Grade
|
Size
|
Working Load Limit (lbs)
|
Weight Ea (lbs)
|
Spring
|
G70
|
3/8 in
|
-
|
-
|
Rubber
|
G80
|
1/2 in
|
|
|
CLEVLOKTM ALLOY J ASSEMBLIES
Part Number
|
Grade
|
End Fitting
|
Chain
|
Working Load Limit (lbs)
|
Weight Ea (lbs)
|
97887G7
|
G70
|
Clevis Pear Lock
|
3/8 in x 10 ft
|
6,600
|
21.0
|
97888G7
|
G70
|
Clevis Grab Hook Riveted
|
3/8 in x 10 ft
|
6,600
|
20.8
|
97901G8
|
G80
|
Omega Lock & Master Link
|
3/8 in x 10 ft
|
7,100
|
22.3
|
97902G8
|
G80
|
Clevis Cradle Grab
|
3/8 in x 10 ft
|
7,100
|
21.8
|
|
 |
WARNING |
|
Death / injury can occur from improper use or maintenance of tie down equipment.
To avoid injury:
- Do not use for overhead lifting.
- Work only with secure footing.
- Inspect equipment before use and periodically during use. Remove from service if cracked, worn, or deformed.
- Do not exceed working load limits. Do not overload - binders develop approximate working load with hand effort.
- Use only alloy (Grade 80 or Grade 100) chain for overhead lifting.
TIE DOWN INSTRUCTIONS
Observe The following instructions and precautions when tying down and binding loads:
1.Maintain secure footing at all times.
2.Inspect equipment before use. Do not use hooks, shackles, links, clips, chain, and other equipment components that are bent, elongated, gouged, nicked, excessively worn, or damaged. Make certain that nuts, bolts, pins, and other fasteners are tightened and secured.
3.Follow DOT FMCS Regulations S392.9, S393.100, and S393.102, and Commercial Vehicle Safety Alliance Cargo Securement Tie-Down Guidelines.
4.Do not exceed the working load limit of equipment. Refer to literature by grade for specific working load limits. Refer also to CM Lifting, Pulling, and Binding Products Manual PMC-10 for information.
5.Center load in hooks, shackles, rings, and other such equipment components. Use spacers on bolts and pins as necessary to maintain center loading.
6.Do not apply load to hook latches; latches are to retain slack slings and chains only.
7.Avoid sudden jerks when applying the load. Rapid load application can produce overloading.
8.Free all twists, knots, and kinks. Apply load in a straight line fashion.
9.Refer to specific instructions when applying load binders. Observe warnings and stand clear of binder handles at all times.
10.Use only alloy chain and attachments (Grade 80) for overhead lifting.
11.Inspect load periodically for securement.
|
|
|
