G43 & G70 CHAIN ASSEMBLIES / CLEVIS GRAB HOOKS EACH END
Part Number
Grade
Size
Package
Working Load Limit (lbs)
Weight Ea (lbs)
638219
G43
3/8 in x 20 ft
Bulk
5,400
30.0
639082
G70 LL
5/16 in x 16 ft
Bulk
4,700
15.3
638284
G70
5/16 in x 20 ft
Bulk
4,700
21.1
639084
G70 LL
5/16 in x 20 ft
Bulk
4,700
19.4
BG639084
G70 LL
5/16 in x 20 ft
Bagged
4,700
18.8
638279
G70LL LL
5/16 in x 25 ft
Bulk
4,700
24.0
63907BG
G70 LL
5/16 in x 25 ft
Bagged
4,700
24.0
639094
G70 LL
3/8 in x 20 ft
Bulk
6,600
30.2
BG639094
G70 LL
3/8 in x 20 ft
Bagged
6,600
30.2
638294
G70
3/8 in x 20 ft
Bulk
6,600
32.9
639094BG
G70 LL
3/8 in x 20 ft
Bagged
6,600
29.7
G70 CHAIN ASSEMBLY / EYE HOOKS EACH END
Part Number
Grade
Size
Working Load Limit (lbs)
Weight Ea (lbs)
639024
G70 LL
5/16 in X 20 ft
4,700
19.5
SPECIAL CHAIN ASSEMBLIES
Part Number
Grade
Size
Description
Working Load Limit (lbs)
Weight Ea (lbs)
32909
G30
5/16 in X
?4
ft1 in
Clevis Latch Hook one end, bulk
1,900
4.8
95265
G43
3/8 in x
2 ft6 in
Oblong Master Link one end, bulk
5,400
5.8
GRADE 70 CHAIN ? DRUM PACK
Part Number
Grade
Size
Package
Working Load Limit (lbs)
Weight Ea (lbs)
679033
G70 LL
3/8 in
400 feet packed in a drum
6,600
560.0
WARNING
Death / injury can occur from improper use or maintenance of tie down equipment.
To avoid injury:
Do not use for overhead lifting.
Work only with secure footing.
Inspect equipment before use and periodically during use. Remove from service if cracked, worn, or deformed.
Do not exceed working load limits. Do not overload - binders develop approximate working load with hand effort.
Use only alloy (Grade 80 or Grade 100) chain for overhead lifting.
TIE DOWN INSTRUCTIONS
Observe The following instructions and precautions when tying down and binding loads:
1.Maintain secure footing at all times.
2.Inspect equipment before use. Do not use hooks, shackles, links, clips, chain, and other equipment components that are bent, elongated, gouged, nicked, excessively worn, or damaged. Make certain that nuts, bolts, pins, and other fasteners are tightened and secured.
3.Follow DOT FMCS Regulations S392.9, S393.100, and S393.102, and Commercial Vehicle Safety Alliance Cargo Securement Tie-Down Guidelines.
4.Do not exceed the working load limit of equipment. Refer to literature by grade for specific working load limits. Refer also to CM Lifting, Pulling, and Binding Products Manual PMC-10 for information.
5.Center load in hooks, shackles, rings, and other such equipment components. Use spacers on bolts and pins as necessary to maintain center loading.
6.Do not apply load to hook latches; latches are to retain slack slings and chains only.
7.Avoid sudden jerks when applying the load. Rapid load application can produce overloading.
8.Free all twists, knots, and kinks. Apply load in a straight line fashion.
9.Refer to specific instructions when applying load binders. Observe warnings and stand clear of binder handles at all times.
10.Use only alloy chain and attachments (Grade 80) for overhead lifting.
11.Inspect load periodically for securement.
