Phone:  (800) 756-6656 
Fax:      (800) 374-2329 

RIGGING HARDWARE
[ UP ]

Shank hook

CM Shank Hooks



  • Available in Carbon, Alloy, Stainless & Bronze material.

  • Heat treated, quenched, and tempered.

  • Pre-drilled latch tab allows addition of a latch.

  • Shank hooks are supplied unthreaded.

  • Design Factors: Carbon and Stainless 5:1, Alloy and Bronze 4:1

  • Bronze hooks are provided for non-sparking and non-marring applications.
Click Here to view Metric Chart

HOOK
NUMBER

REF

WLL**
CARBON TONNES*

WLL**
ALLOY TONNES*

WLL**
BRONZE TONNES*

WLL**
 CARBON
LBS

WLL**
ALLOY
LBS

WLL**
 BRONZE
 LBS

WLL**
STAINLESS LBS

2

1302

0.75

1.0

0.5

1654

2205

1103

800

3

1303

1.0

1.5

0.6

2205

3308

1323

1200

4

1304

1.5

2.0

1.0

3308

4410

2205

1600

5

1305

2.0

3.0

1.4

4410

6615

3087

2400

6

1306

2.5

3.5

1.7

5513

7718

3749

2760

7

1307

3.0

5.0

2.0

6615

11025

4410

3200

8

1308

4.0

5.5

2.7

8820

12128

5954

4320

9

1309

5.0

7.0

3.5

11025

15435

7718

5200

11

1011

7.5

11

5.0

16538

24255

11025

7938

15

1315

10

15

6.5

22040

33060

15000

10800

22

1322

15

22

10

33060

48488

22500

16200

** WLL = Working Load Limit

*1 TONNES (METRIC) = 2205 LBS

 

HOOK
NUMBER

DIMENSIONS (IN)

D

F

G

H

J

K

L

2

3.06

1.25

0.87

1.05

0.93

0.63

5.28

3

3.33

1.38

0.94

1.11

0.97

0.71

5.78

4

3.67

1.50

1.06

1.21

1.06

0.88

6.29

5

4.20

1.63

1.27

1.43

1.19

0.94

7.26

6

4.67

1.63

1.42

1.59

1.38

1.00

7.55

7

5.11

2.00

1.44

1.63

1.50

1.31

8.63

8

6.09

2.25

1.69

1.98

1.75

1.44

11.81

9

6.24

2.50

1.82

2.01

1.78

1.68

10.43

11

7.69

3.00

2.25

2.63

2.41

1.88

12.50

15

8.37

3.25

2.59

2.94

2.50

2.19

13.56

22

10.19

4.25

3.00

3.50

3.30

2.69

16.77

 

HOOK
NUMBER

DIMENSIONS (IN)

O

P

R

T

X

Y

Z

2

0.93

2.12

2.35

0.87

0.59

2.06

0.69

3

0.97

2.27

2.59

0.97

0.66

2.25

0.78

4

1.06

2.54

2.75

1.03

0.72

2.50

1.00

5

1.16

2.80

3.16

1.16

0.88

2.84

1.00

6

1.28

3.24

3.13

1.1

1.00

3.00

1.16

7

1.41

3.47

3.85

1.53

1.16

3.34

1.25

8

1.66

4.06

4.13

1.28

1.22

6.00

1.44

9

1.69

4.59

4.77

1.94

1.41

3.84

1.56

11

2.22

5.63

5.88

2.46

1.81

4.38

2.00

15

2.23

6.06

6.38

2.62

2.00

4.60

2.19

22

3.05

6.93

8.14

2.74

2.56

5.63

2.63

 

 

HOOK NUMBER

MAXIMUM SHANK DIAMETER AFTER MACHINING

MINIMUM THREAD SIZE CARBON

MINIMUM THREAD SIZE ALLOY & BRONZE

LATCH HOLE DIAMETER

LATCH KIT CODE

2

0.53

1/2 - 13 UNC

1/2 - 13 UNC

0.144

4X1302

3

0.62

5/8 - 11 UNC

5/8 - 11 UNC

0.180

4X1303

4

0.66

5/8 - 11 UNC

5/8-11 UNC

0.180

4X1304

5

0.81

3/4 - 10 UNC

3/4 - 10 UNC

0.180

4X1305

6

0.93

7/8 - 9 UNC

7/8 - 9 UNC

0.180

4X1305

7

1.03

7/8 - 9 UNC

7/8 - 9 UNC

0.203

4X1307

8

1.19

7/8 - 9 UNC

7/8-9 UNC

0.203

4X1309

9

1.27

1 1/8 - 7 UNC

1 1/8 - 7 UNC

0.203

4X1309

11

1.26

1 1/4 - 7 UNC

1 1/4 - 7 UNC

0.257

4X1311

15

1.51

1 1/2 - 6 UNC

1 1/2 - 6 UNC

0.265

4X1315

22

2.23

2 1/4 - 4 1/2 UNC

2 1/4 - 4 1/2 UNC

0.390

4X1322

 
WARNING
To avoid injury:
  • Do not exceed Working Load Limit (WLL).
  • Insufficient thread engagement can result in loss of load.
  • The following must be observed:
    • To obtain maximum strength, threads must be class 2 or better.
    • Thread engagement with nut must be not less than one thread diameter.

Click On The Respective Links To View More Details
Click On The Respective Links To View More Details