Phone:  (800) 756-6656 
Fax:      (800) 374-2329 

Shackle - Class 2 Screw Pin Chain - Carbon



  • RRC-271D Amend 1 Type IVB, Grade A, Class 2

  • All shackles meet or exceed Federal Specification RRC-271D

  • Working Load Limit and traceability codes shown as permanent marking on body and pin

  • Available in painted, galvanized and self-colored finishes (Dacromate coating upon special request only)

  • All shackles have alloy quenched and tempered pins

  • Shackles made from technically advanced microalloy material

  • Load break tests consistently show microalloy outperforms quenched and tempered carbon material

  • Shock load testing of assemblies at -300oF consistently demonstrate microalloy outperforms quenched and tempered carbon material*

  • Shackles exhibit extreme deformation before failure*

  • Special testing and certification including magnetic particle, proof load, and fatigue test available upon request at time of order

  • Special products engineering available to fit your special lifting, tie down, and pulling needs


*Independent lab verified
Click Here to view Metric Chart
SIZE

DIMENSIONS (INCHES)

SIZE

Diameter of Pin

Diameter of Hole

Width between Eyes

Inside Length

Outside Diameter of Eye

D

(nominal)

P

(nom)

E

(ref)

W
(nom)

L
(nom)

R
(max)

1/4

0.312

0.401

0.469

0.875

0.875

5/16

0.375

0.463

0.531

1.031

1.000

3/8

0.438

0.531

0.656

1.250

1.125

7/16

0.500

0.593

0.750

1.437

1.250

1/2

0.625

0.718

0.813

1.625

1.375

5/8

0.750

0.843

1.063

2.000

1.875

3/4

0.875

0.968

1.250

2.375

2.125

7/8

1.000

1.109

1.438

2.812

2.375

1

1.125

1.234

1.688

3.188

2.625

1 1/8

1.250

1.375

1.812

3.562

2.875

1 1/4

1.375

1.531

2.031

3.938

3.250

1 3/8

1.500

1.656

2.250

4.438

3.500

1 1/2

1.625

1.781

2.375

4.875

3.750

1 5/8

1.750

1.906

2.625

5.250

4.125

1 3/4

2.000

2.156

2.875

5.750

4.500

2

2.250

2.406

3.250

6.750

5.250

 

Size

Working Load Limit WLL (tons)*

Product Code

Painted

UPC 43927-

Galvanized UPC 43927-

Approx Weight Each (lbs)

1/4

3/4

M746

40220

40277

0.11

5/16

1

M747

40224

40278

0.17

3/8

1 1/2

M748

40227

40279

0.29

7/16

2

M749

40231

40280

0.40

1/2

3

M750

40235

40281

0.60

5/8

4 1/2

M751

40239

40282

1.2

3/4

6 1/2

M752

40243

40283

2.0

7/8

8 1/2

M753

40247

40284

3.0

1

10

M754

40251

40285

4.5

1 1/8

12

M755

40254

40289

6.5

1 1/4

14

M756

40257

40287

8.6

1 3/8

17

M766

40261

40291

12

1 1/2

20

M757

40264

40293

15

1 5/8

24

M785

40268

40295

22

1 3/4

30

M777

40272

40297

27

2

35

M758

40276

40299

36

 

*1 ton = 2000 lbs
WARNING
To Avoid Injury:
  • Do not exceed working load limit
  • Always follow safe rigging practices
  • Do not shock load or impact load
  • Do not replace pin with other than original equipment parts
  • Always inspect for wear and or damage before use.
  • Replace if damaged or worn
  • Please note side load limitations

Click On The Respective Links To View More Details
Click On The Respective Links To View More Details